New Products
Top-10 Product Honerable Mentions
- UterFlush
- Intra Bath
- Cheetah DM1100
- Take Off
- Biological Water Treatment System
- Key Dollar Micro-Screen Two Stage Separator
- Oxbo 6420
- JackRabbit 30/36 Elevator W/ woodchuck De-Sticker
- Hobart Trek 180 Cordless Welder
- Easy Rake Silage Facer
UterFlushBack to Top |
||
| COMPANY: | Van Beek natural Science |  |
| CONTACT: | James Knevelbaard | |
| ADDRESS: | 3689 460th St Orange City, IA 50141 |
|
| WEBSITE: | www.vanbeeknaturalscience.com | |
| E-MAIL: | jamesk@vanbeeknaturalscience.com | |
| PHONE: | 712-737-2958 | |
| BOOTH : | 6234& 6235 | |
| Product Description: |
Offering a natural, antibiotic-free and economical alternative to capsules and boluses, UterFlush uses essential oils to help maintain or restore the normal uterine environment which helps insure cow reproductive performance post-calving. The fast-acting liquid flush is available in a convenient 1-ounce multi-dose tube and a 5-ounce container. The calibration ring on the syringe can be used to dispense from one to eight 3.75-ml administrations at a time. When mixed with distilled water, the solution is inserted into the cervix with a pipette tube. Once inside the uterus, UterFlush foams up and expands to all areas of the uterus, allowing for full coverage. In university trials, the active compound used in this all-natural product was more effective against all varieties of bacteria tested than several antibiotics. For added convenience, UterFlush can be used right after calving or after the cervix has contracted, typically within three to six hours post-calving. Because the product leaves no residue, no milk withholding is required. | |
Intra BathBack to Top |
||
| COMPANY: | Intracare North America |  |
| CONTACT: | Koos Vis | |
| ADDRESS: | PO Box 111/210 McKechney Ave Diamond City, Alberta/ Tokoto |
|
| WEBSITE: | www.allabouthooves.com | |
| E-MAIL: | info@hoofsol.com | |
| PHONE: | 403-388-4309 | |
| BOOTH : | 6200 | |
| Product Description: |
An innovative three-part device can make hoof bath an easier job for dairy farmers, while saving money on cleaning concentrate. Lightweight and durable, the easy-to-assemble Intra Bath consists of two double-walled, high strength plastic tubs and a stainless steel grill that fits between the two tubs. Designed for ease of handling, it reduces strain on the operator, making daily use an easy chore. Intra Bath reduces the amount of concentrate needed in several ways. With a capacity of about 35 percent less than a traditional bath, it can treat more using less product. No product is mixed under the belly. Because the Intra Bath is longer than regular baths, hoofs receive more dips or treatments in the bath solution. And, since 60 percent of any manure falls through the grill to the barn floor, the solution says cleaner for increased effectiveness. When not being used, Intra Bath can be disassembled quickly to take up less storage space than conventional baths. | |
Cheetah DM1100Back to Top |
||
| COMPANY: | Cheetah Industries |  |
| CONTACT: | Dana Shaw | |
| ADDRESS: | 179 Niblick Rd, STE 422, Paso Robles, CA 93446 |
|
| WEBSITE: | www.cheetahrodentcontrol.com | |
| E-MAIL: | dana@cheetahrodentcontrol.com | |
| PHONE: | 805-227-0624 | |
| BOOTH: | 3221 | |
| Product Description: | In three minutes, a patent pending machine can eliminate burrowing rodents from a complex, covering up to 400 square feet, using carbon monoxide in the exhaust from an internal combustion engine, says the inventor, Dana Shaw. The Cheetah DM1100 exterminates rodents living in open burrow systems, such as squirrels, voles, prairie dogs and gophers. The 15-pound portable unit features a twocycle engine and a centrifugal fan assembly. This assembly collects the exhaust from the engine, compresses it and blows it through the exhaust tube, which is placed in the entry/exit opening of the rodent tunnel. "It's rugged, easy to use and very cost effective," Shaw says. "It uses no explosives and doesn't harm root systems." In extensive field trials, farmers have achieved a kill rate of more than 80 percent with the first treatment. Second, third and fourth treatments have reduced seasonal populations by more than 95 percent. "It's ideal for use on slopes and in open country," he says. | |
Take OffBack to Top |
||
| COMPANY: | Biagro Western Sales |  |
| CONTACT: | Patrick Murphy | |
| ADDRESS: | 35801 Road 132, Visalia, CA 93292 |
|
| WEBSITE: | www.biagro.com | |
| E-MAIL: | patrick@biagro.com | |
| PHONE: | 559-635-4784 | |
| BOOTH: | 3212 & 3213 | |
| Product Description: | A new metabolic plant stimulant, developed at the Los Alamos National Laboratory in New Mexico, allows farmers to make more efficient use of nitrogen while increasing nitrate uptake and carbon fixation. Take Off enhances growth of tree fruit, vines, vegetables and grain crops, including wheat and corn. It represents a major breakthrough in improving crop productivity, says Biagro Western Sales, Inc., which has obtained exclusive international rights to market the product. The company has tested Take Off in four years of field trials in Europe and in other research in the United States. The product accelerates plant maturity, allowing plants to assimilate nitrogen efficiently by coordinating nitrogen uptake and photosynthesis. In field tests, Take Off reduced nitrogen inputs by 25 percent to 35 percent. It increases yields without the use of growth hormones, by enhancing levels of nutrients already in the plant. The product can be applied as a spray to plant leaves or as a root treatment. | |
Biological Water Treatment SystemBack to Top |
||
| COMPANY: | All Natural Environmental Solutions |  |
| CONTACT: | Greg Carlton | |
| ADDRESS: | 1921 S. Cherry Ave., Fresno, CA 93721 |
|
| WEBSITE: | www.ane-usa.com | |
| E-MAIL: | greg@ane-usa.com | |
| PHONE: | 559-275-3891 | |
| BOOTH: | K26 | |
| Product Description: | A new environmentally- friendly water treatment system offers farmers and ranchers a more economical alternative to mechanical filters for removing pollutants when recycling and reusing waste water when cleaning farm equipment. The Biological Water Treatment System uses fixed film bacteria to digest most types of wastes, including oils, greases and hydrocarbons. The process leaves behind only water, which can be reused endlessly, and carbon dioxide. Most hydrocarbons disappear after the digestion process, resulting in little, if any, waste, says the company. Capital costs of this system are similar to conventional mechanical filtration systems. However, it does not have the expensive filter media disposal costs nor the labor and maintenance expenses of a mechanical filtration system. For wash pads with access to sewers, the environmentallyfriendly system can be used to augment local wastewater treatment plants. Otherwise, it can be used in a total closed loop recycling system without the odors of a typical, conventional system. | |
Key Dollar Co., LLCBack to Top |
||
| COMPANY: | Key Dollar Co., LLC |  |
| CONTACT: | Hank Svehaug | |
| ADDRESS: | 321 Peabody Street Milton-Freewater, OR 97862 |
|
| WEBSITE: | www.keydollar.com | |
| E-MAIL: | key_dollar@hotmail.com | |
| PHONE: | 800-241-2427 | |
| BOOTH: | DX15 | |
| Product Description: | The unique Micro- Screen Two Stage Separator gives milk producers a more efficient way to treat flush water from barns and manure handling trucks and equipment for recycling. The top screen removes the larger solids, permitting the self-cleaning bottom screen to remove the smaller solids from heavy or fine slurries that otherwise would impede its performance and efficiency. "There are no other double screen separators like it," says Hank Svehaug, who developed the unit. It is one of a line of solid and slurry separators made by his company, Key Dollar Co., LLC, Milton-Freewater, Ore., for various agricultural and municipal applications. One person can easily change both the lightweight top and bottom screens, which are available in opening sizes from .0017 inch to as large as needed. The top screen can be easily pulled up for changing the screen, for inspection and to access the spray nozzles that clean the bottom screen. The stainless steel machine is powered by two 1/2-hp motors. | |
Oxbo 6420Back to Top |
||
| COMPANY: | Oxbo International, Corp |  |
| CONTACT: | Kathryn Van Weerdhuizen | |
| ADDRESS: | 270 Birch Bay Lynden Rd, Lynden, WA 98264 |
|
| WEBSITE: | www.oxbocorp.com | |
| E-MAIL: | kvanweerdhuizen@oxbocorp.com | |
| PHONE: | 888-656-7826 | |
| BOOTH: | N19 & N21 | |
| Product Description: | Based on input from growers, processors and nurseries, the Oxbo 6420 has been designed from the ground up specifically to harvest super high-density (SHD) olive groves. It offers the productivity and the high quality olives required for this planting system to revolutionize the olive oil industry, says the company. The durability of the harvester's unique chassis and shaking system were proven during extensive field testing in California in 2009 under the Korvan brand. The 6420 features a low-mounted, 173-hp turbocharged John Deere engine for powerful performance and ultimate stability. With an industry-leading 108-inch minimum tunnel height, a 54-inch tunnel width and a 30-inch lift, it out-performs any machine on the market today. Other features include nylon catcher plates, 12-inch conveyor buckets, a bow rod head to minimize tree damage,a three fan cleaning system and three cleaning fans. Oxbo backs the 6420 with over 50 years of designing, engineering, building and supporting niche market harvesting solutions. | |
JackRabbit 30/36 Elevator W/ woodchuck De-StickerBack to Top |
||
| COMPANY: | Jackrabbit |  |
| CONTACT: | Tim Harms | |
| ADDRESS: | 471 Industrial Ave, Ripon, CA 95366 |
|
| WEBSITE: | www.jackrabbit.bz | |
| E-MAIL: | tim@jackrabbit.bz | |
| PHONE: | 209-599-6118 | |
| BOOTH: | K4,K2,L1,L3 | |
| Product Description: | The JackRabbit Elevator, introduced to the nut handling industry 15 years ago as the first high-speed field elevator with the revolutionary Woodchuck Desticker, has been redesigned to boost productivity. Featuring the latest in technical advances, the 30/36 elevator moves more nuts faster than ever as it removes sticks. The unique placement and shape of the desticking unit removes a very high percentage of the sticks while maintaining high product flow. Two drive motors on the 30-inch horizontal belt eliminate belt slippage or stalling and the newly-designed 36-inch incline chute moves the most product of any elevator. Both the incline belt and incline chute are easier to clean and maintain. The Woodchuck lowers hydraulically at the push of a button into the product to remove sticks, which are carried from a cross-conveyor out of the product flow and away. A high-performance air-cooled, four-cylinder turbo diesel engine and variable speed, high-flow hydraulic pumps offer reliable, low maintenance operation and easy serviceability. | |
Hobart Trek 180 Cordless WelderBack to Top |
||
| COMPANY: | Hobart Trek 180 Cordless Welder |  |
| CONTACT: | Ellen Anderson | |
| ADDRESS: | 1635 Spencer Street Appleton, WI 54914 |
|
| WEBSITE: | www.hobartwelders.com | |
| E-MAIL: | eander@hobartwelders.com | |
| PHONE: | 920-735-4033 | |
| BOOTH: | D9 | |
| Product Description: | Using the Trek 180 battery-powered MIG welder, you can weld anywhere on your farm or ranch without a generator or access to electricity. Powered by two internal, premium high-performance sealed lead-acid batteries, it produces heavy weld power to fabricate or repair 1/4-inch mild steel in a single pass. The integrated, high-purity energy system delivers about 100 inches of weld before recharging is necessary. The Trek 180 can be charged inside a vehicle using an automotive power inverter. It can be charged completely in about 90 minutes and recharged in about 20 minutes. When plugged into 115-V power, it provides 180 amps of power. The unit is set up for both self-shielded flux-cored and solid gas-shielded wires from .024 to .035-inch diameter. The Trek 180 includes built-in wire feeder, a built-in gas solenoid valve, a 10-foot MIG torch, a 10-foot work lead with clamp, storage pouch, spare contact tips and a spool of .030-inch self-shielded flux-cored welding wire. | |
Easy Rake Silage FacerBack to Top |
||
| COMPANY: | Riverview, LLP |  |
| CONTACT: | Anthony Ekren | |
| ADDRESS: | 26406 470th Ave, Morris, MN 56267 |
|
| WEBSITE: | www.easyrakefacer.com | |
| E-MAIL: | info@easyrakefacer.com | |
| PHONE: | 320-392-5609 | |
| BOOTH: | DS 98 | |
| Product Description: | Designed by dairy farmers, the Easy Rake Silage Facer loader attachment saves time, reduces maintenance costs and protects silage quality by preserving particle length. Unlike mechanical silage facers, this tool has no moving parts to maintain, hoses to attach or motors to replace. Simply lift the rake to the top of the pile and pull it down along the face of the silage. "The Easy Rake maintains the feed quality that digging into the pile with a bucket to remove it destroys," says Adam Zeltwanger, a member of the team that spent four years developing the unit for its dairy operation, Riverview, LLP, Morris, Minn. "Also, this tool doesn't grind up the silage like a mechanical facer does. It cuts facing time in half, allowing you more time for other tasks around the farm, and it works on just about any size pile." The quick-attach unit is available in various sizes to fit skid-steer loaders, wheel loaders and telehandlers. | |
Click here for 2011 featured New Products...